MicroE编码器MII5510-AB-200-4-1-0技术参数及介绍

MicroE编码器MII5510-AB-200-4-1-0技术参数及介绍

MicroE产品采用PurePrecision和VeraPath技术构建而成。MicroE品牌的微型精密光学光栅编码器有多种外形和安装选项，辅以增量和绝对接口，分辨率可达1.2纳米。有多种旋转和线性刻度表可供选择，精度可达1xm。

MICROE编码器MII5000系列介绍

Mercury II的传感器设计实现分辨率高达1.2nm和高精度性能在一个紧凑的传感器体。

Mercury II的编码器技术实现了同类产品中最高的分辨率和精度，具有低周期误差，低抖动，较小的传感器，和更低的功耗。

Mercury II的低周期误差超过了所有其他的20μm编码器。其优点是直线电机、级和钢丝合器的速度控制；更精确，更快的线性定位。

可用的最小磁带比例系统：只有6mm宽，包括索引和限制-小于其他编码器系统宽度的1/2。

最宽的对准公差：具有行业中最宽的对准公差，全+/-2度，汞II是最容易和最快的传感器对齐和设置。你可以在30秒内对齐水星II传感器。

内置或粘贴的光学索引和限制：订购磁带或线性玻璃秤，以最快地安装，或在胶带的任何地方安装粘贴的索引和限制标记。

Mercury II’s advanced sensor design achieves resolutions up to 1.2nm and high accuracy performance in a compact sensor body.

Mercury II’s encoder technology achieves the highest resolution and accuracy in its class, with low cyclical error, low jitter, smaller sensors, and lower power consumption.

Mercury II’s low cyclical error surpasses every other 20μm encoder. The benefits are smoother velocity control for linear motors, stages and wire bonders; More precise, and faster linear positioning.

Smallest tape scale system available: only 6mm wide, including index and limits – less than 1/2 the width of other encoder systems.

Broadest Alignment Tolerances: With the broadest alignment tolerances in the industry, a full +/-2 degrees, Mercury II is the easiest and the fastest sensor to align and setup. You can align the Mercury II sensor in under 30 seconds.

Built-in or Stick-on Optical Index and Limits: Order tape or linear glass scales with built-in markers for fastest installation, or install stick-on index and limit markers anywhere on cut-to-length tape scales.

MICROE编码器MII5000系列其他常用型号：

MICROE MII5510

MICROE MII5530

MICROE MII5550

MICROE MII5810

MICROE MII5830

MICROE MII5850

MICROE M1510-40

MICROE M1510H-40

MICROE MII5510-AB-200-4-1-0