NOVOTECHNIK传感器RSC2800系列RSC 2801-606-112-201技术参数及选型

NOVOTECHNIK在20世纪50年代将电位器引入通用机械工程领域。从那时起，该公司开发出用于位置传感器和旋转和线性电位计的技术，在延长的使用寿命内为标准设置了出色的线性度和可靠性。

该公司开发和生产各种旋转和线性位置传感器，采用接触和非接触技术，适用于汽车，机械工程，塑料，医疗设备，液压，气动，医疗产品和控制领域的各种运动控制应用行业。

Type designations	RSC - 28 _ _ - _ _ _ - 1 1 _ - _ _ _ analog voltage
Mechanical Data
Mounting	2 screws M4 and washer
Starting torque of mounting screws with washer at housing flange	180 Ncm
Mechanical travel	360 continuous °
Permitted shaft loading (axial and radial) static or dynamic force	20 N
Torque	1.0 (IP67); 0.5 (IP65); 0.15 (IP54) Ncm
Maximum operational speed	800 (120, if T > 85°C) min-1
Weight	~ 50 g
Electrical Data
Supply voltage Ub 5	24 (18 ... 30) VDC
Current consumption (w/o load)	typical 15 (typ. 8 on request) per channel mA
Reverse voltage	yes, supply line
Short circuit protection	yes (vs. GND and supplyy)
Measuring range	0 to 30° up to 0 to 360, oprogrammed in 10° steps °
Number of channels	1
Update rate	typ.5 kHz
Resolution	12 bit
Repeatability	0.1 °
Hysteresis	<0.1 °
Independent linearity	≤0.5 ± % FS
Output signal	0.1...10 VDC (load >10 kΩ)
Temperature error at measuring range 30 up to 170° Temperature error at measuring range 180 up to 360°	0.94 ± % FS 0.5 ± % FS
Insulation resistance (500 VDC)	> 10 MΩ
Cross-section cable	AWG 26, 0.14
Environmental Data
Temperature range	-40...+85 (generally -25...+85 with M12 connector) °C
Vibration (IEC 60068-2-6)	5...2000 Hz Amax = 0.75 mm amax = 20 g
Shock (IEC 60068-2-27)	50 (6 ms) g
Life	> 50x106 movements
MTTF (DIN EN ISO 13849-1 parts count method, w/o load)	107 years
Functional Safety	When using our products in safety-related systems, please contact us
Protection class (DIN EN 60529)	IP54 / IP65 / IP67
EMC compatibility	EN 61000-4-2 electrostatic discharges (ESD) 4 kV, 8 kV EN 61000-4-3 electromagnetic fields 10 V/m EN 61000-4-4 electrical fast transients (burst) 1 kV EN 61000-4-6 conducted disturbances, induced by RF fields 10 V/m eff. EN 61000-4-8 power frequency magnetic fields 3 A/m EN 55011/EN 55022/A1 radiated disturbances class B

NOVOTECHNIK传感器RSC2800系列介绍

RSC 2800 传感器利用非接触式磁测量技术来确定测量角度。与传统的霍尔传感器不同，它测量磁场的方向。输出可以是模拟电压或电流。

外壳由特殊的高级耐温塑料材料制成。细长的槽使安装简单，并且易于机械调整。

提供三种轴选件，包括可确保快速简单安装的推入式联轴器选件。换能器对灰尘或湿度不敏感。

通过密封在外壳中的屏蔽电缆进行电气连接。 M12 连接器作为选件提供。

特殊功能

• 非接触技术

• 角度范围从 30° 到 360°

• 内部分辨率 12 位

• 独立线性度 ±0.5 %

• 防护等级IP54、IP65、IP67

• 使用寿命长

• 滞后非常小

• 单输出和冗余版本

• 可提供推入式联轴器或标记轴

• 安装简单

The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors, the orientation of the magnetic field is measured. The output is available as either analog voltage or current.

The housing is made of a special high grade temperatureresistant plastic material. Elongated slots allow simplicity in mounting together with ease of mechanical adjustment.

Three shaft options are available, including a push-on coupling option that ensures fast and simple installation. The transducer is not sensitive to either dirt or humidity.

Electrical connection is made via a shielded cable which is sealed into the housing. An M12 connector is available as an option.

Special features

• non-contacting technology

• angular range from 30° to full 360°

• internal resolution 12 bit

• independent linearity ±0.5 %

• protection class IP54, IP65, IP67

• long life

• very small hysteresis

• single output and redundant versions

• available with push-on coupling or marked shaft

• simple mounting