SPM振动变送器SLD系列SLD723TCP-5技术参数及介绍

SPM在基于状态的维护和过程优化方面的广泛产品系列为所有类型的状态监测提供智能、经济高效和完整的解决方案。

Part number	SLD723
Mounting thread	M8 tapped hole for mounting stud
Connection	TB, TCP
Frequency range	2-1000 Hz
Sensitivity	0-25 mm/s

SPM振动变送器SLD系列介绍

变送器在其频率范围内提供与振动速度成比例的 4-20 mA 输出信号。输出信号可以传输到常见的过程控制系统，如 PLC、DCS 和 SCADA。变送器使用来自任何标准 4-20 mA 回路的电源运行。不需要额外的电源。

变送器的特点是独特的微控制器设计和存储在传感器中的校准数据。所有变送器都配有顶部连接器，可快速轻松地安装。

技术概览

SPM的振动变送器具有多种尺寸、配置和规格，可满足需求。所有变送器都是内部隔离的，工作温度范围为− 40 至 +85 °C（− 40 至 +185 °F）。频率范围是为永久安装的变送器指定的。使用磁脚时，测量结果会在较高频率下受到影响。

连接备选方案：

TB = 2 针连接器 MIL-C-5015

TCP = 带保护管适配器的集成电缆（3、5、10 或 20 m）

The transmitters provide a 4-20 mA output signal proportional to the vibration velocity, across its frequency range. The output signal can be transmitted to common process control systems like PLC, DCS, and SCADA. The transmitters operate using power from any standard 4-20 mA loop. No additional power is necessary.

Features of the transmitters are unique microcontroller design and calibration data stored in the sensor. All transmitters come with a top connector for fast and easy installation.

Technical overview

SPM vibration transmitters come in a variety of sizes, configurations, and specifications to match your needs. All transmitters are internally isolated and have an operating temperature range of −40 to +85 °C (−40 to +185 °F). The frequency range is specified for the transmitter when permanently installed. The measuring results will be affected at higher frequencies when using a magnetic foot.

Connection alternatives:

TB = 2-pin connector MIL-C-5015

TCP = Integral cable (3, 5, 10, or 20 m) with an adapter for protection tube

SPM振动变送器SLD系列其他常用型号：

SPM SLD722

SPM SLD723

SPM SLD724

SPM SLD732

SPM SLD733

SPM SLD734

SPM SLD822

SPM SLD823