CINCINNATI鼓风机HP系列HP-6E24技术参数及选型

CINCINNATI成立于1956年，CINCINNATI生产铸铝和钢，铝和不锈钢风机。

MTR,10 HP,2850/3450 RPM,3PH,50/60Hz,380/50 & 230/460/60,TEFC, Div 2, I/ABCD,II/F&G,Prem Eff,FM,215T,IP55,1.25 SF,F Insul.,40C Amb., Tropicalized for Storage,Shielded Bearings,F1 Box,Water tight conduit box,Stainless Nameplate,Cast Iron Frame,1.0SF&10HP&IE2 EFF@50 HZ,VFD 1000:1VT

CINCINNATI鼓风机HP系列介绍

• 每个径向鼓风机型号都有四到六个轮尺寸，可通过直接驱动装置选择更多气流。

• 连续焊接外壳和聚四氟乙烯轴密封，以防止漏气。

• 每个ASA钻孔的入口和出口法兰，150磅和ANSI，125磅标准管道尺寸是标准配置。

• 鼓风机外壳是可逆的，可以45°的增量旋转。

• 可拆卸的进口和驱动侧板允许在不断开进口或排放连接的情况下拆卸皮带或电机，或皮带驱动型号上的轴和轴承。

• 所有风扇都会接受机械运行测试，以确保在发货前保持适当的平衡和对齐。

• 配置8个单元标配轴/联轴器保护装置。

• 9和9CB装置标配带护罩。

• 也可提供铝或不锈钢结构。

• Each radial blower model is available with four to six wheel sizes for more airflow selections with a direct drive arrangement.

• Continuous welded housings and teflon shaft seal to prevent air leakage.

• Inlet and discharge flanges drilled per ASA, 150 pound and ANSI, 125 pound standard pipe sizes, are standard.

• Blower housings are reversible and rotatable in 45° increments.

• Removable inlet & drive side plates allow wheel or motor, or shaft & bearings on belt driven models, to be removed without disconnecting inlet or discharge connections.

• All fans receive a mechanical run test to assure proper balance and alignment before shipping.

• Arrangement 8 units come standard with shaft/coupling guards.

• Arrangement 9 and 9CB units come standard with belt guards.

• Also available in aluminum or stainless steel construction.

CINCINNATI鼓风机HP系列其他常用型号：

CINCINNATI HP-4C17

CINCINNATI HP-4C18

CINCINNATI HP-4C19

CINCINNATI HP-4C20

CINCINNATI HP-4C21

CINCINNATI HP-4C22

CINCINNATI HP-6B14