SIKORA检测仪CENTERVIEW 8010规格描述

SIKORA从用于电线和电缆工业生产的测量设备开始，已经发展了技术超过40年。作为测量和控制技术以及检查，分析和分拣系统的优质公司，凭借创新的技术为许多行业的质量保证，过程优化和成本节省设定了标准解决方案。

SIKORA产品有：电线线缆，管材及板材，光纤光缆，塑料，金属

Specifications
Measuring principle	Non-contact, optical/inductive sensors with 4-axes-CCD-line technology combined with impulse-driven laser light sources
Applications	For all round, single conductor wires and cables with solid or stranded conductors such as telephone cables, data cables (CAT 5, 6 and 7), coax cables, automotive or installation cables
Exposure Time	0.25 μs
Measuring Rate	500 measurements/sec (other on demand)
Measuring Range	0.25 - 10 mm*
Sight Field	12.5 mm
Resolution	Selectable 1 μm, 10 μm (factory setting is 1 μm)
Accuracy	Eccentricity: better 1 μm** Diameter: 1 μm*
Repeatability	Eccentricity: ± 1.0 μm Diameter: ± 0.1 μm
Interfaces	RS485 + RS232 diagnosis interfaces Optional: Profibus-DP (option at CENTERVIEW 8000e), industrial fieldbus (e.g. Profinet IO, EtherNet/IP, CANopen, DeviceNet)
Power Supply	115 or 230 V AC ± 10%, 50/60 Hz, 500 VA
Ambient Temperature	+ 5 to + 50°C
Dimensions (W x D x H)	200 x 150 x 1,106 mm
* Optionally, the CENTERVIEW 8010 is also available for micro-coax cables with product diameters from 0.1 to 10 mm
** Stranded: 2 μm

SIKORA检测仪产品介绍：

Non-contact specialist

The CENTERVIEW 8000 is a non-contact gauge head, specifically designed for production lines of all round, single conductor wires, and cables with single or multi-wire conductors and solid or foamed insulations.

The system measures online the eccentricity, wall thickness, diameter and the ovality of cables with high single value precision. The measuring values are taken from 4 axes (diameter) respectively at 8 points (eccentricity, ovality) and are visualized on the integrated display or at the processor systems of the ECOCONTROL Series. The operator receives immediately clear information about eccentricity values that can be instantly used for control or centering of the cross head. This assures maximum material savings.

Measurement of micro-coax cables

For a number of applications such as mobile phones, LED displays or medical probes micro-sized wires are required. These cables have a conductor diameter of 25 micrometers with an insulation wall thickness of 80 micrometers. For these diameter ranges, cable specifications have to be exactly realized in order to transfer high-frequent signals without loss.

Especially for the measurement of eccentricity, wall thickness, diameter and ovality of micro-coax cables, the CENTERVIEW 8010 is also available for product diameters from 0.1 to 10 mm.

Benefits

Non-contact 8-point eccentricity measurement

4-axes diameter measurement

8-point ovality measurement

Scatter plot shows distribution of short-term variations

Automatic centering of the gauge head

Free of maintenance and calibration

Integrated 7" TFT monitor (CENTERVIEW 8000e)

Measurement of micro-coax cables

CENTERVIEW 8000 是一种非接触式测头，专为圆形、单芯电线和单芯或多芯电缆以及实心或泡沫绝缘的生产线而设计。

系统在线测量电缆的偏心率、壁厚、直径和椭圆度，单值精度高。测量值分别取自 4 个轴（直径）的 8 个点（偏心率、椭圆度），并在集成显示器或 ECOCONTROL 系列的处理器系统上可视化。操作员会立即收到有关偏心值的清晰信息，这些信息可立即用于十字头的控制或定心。这确保了最大程度的材料节省。

微同轴电缆的测量