SENSOREX位移传感器SX40000系列SX40240 690040240介绍

SENSOREX工厂生产的设备即使是复杂的水分析也应该快速简单地执行。SENSOREX专门设计和制造pH电极，ORP电极，电导率和TDS传感器，以及其他电化学和光学测量技术。

SENSOREX产品有：传感器，控制器，变送器等等。

SENSOREX位移传感器SX40000系列产品介绍

Meggitt (Sensorex) selected the best MEMS cells available on the market and associated them to the digital signal compensation and processing stage to obtain a tilt sensor that matches the key performances of servo-inclinometers, at an optimized cost.

It achieves a maximum scale factor non-linearity error <0.05% Full Scale, a maximum bias calibration residual error on [-40°C/+85°C] of ±0.057° and a maximum scale factor calibration residual error on [-40°C/+85°C] of ±0.5%.

SX40000 tilt sensor achieves superior performances under vibrations (low bias rectification error, low noise) with the use of over-damped sensitive elements and a very innovative differential measurement principle. Furthermore, the sensitive elements are designed to withstand very high g shocks (200g/ 6ms).

Power supply can span from +4.5 to +30VDC. This unit is available in 6 different ranges, ±3°, ±14.5°, ±70°. Signals are made available to the end-user as 4-20mA, RS485 and USB outputs.

Specifically designed to operate in stringent vibratory environments, one of the key parameters of our MEMS tilt sensor is its adjustable bandwidth between 0.01Hz and 10Hz (thanks to a configurable digital filter).

A complete auto test is automatically made at the start of the sensor and results are transmitted to the digital outputs and to the TOR BIT-OUT output.

Applications

Robotics

Safety purposes (cranes, platforms…)

Civil engineering monitoring (alignment of structures)

Industrial & machining equipment

Antenna positioning

Meggitt (Sensorex) 选择了市场上最好的 MEMS 单元，并将它们与数字信号补偿和处理阶段相关联，以优化成本获得与伺服测斜仪的关键性能相匹配的倾斜传感器。

它实现了最大比例因子非线性误差 <0.05% 满量程，[-40°C/+85°C] 上的最大偏置校准残差为 ±0.057°，最大比例因子校准残差为 [-40 °C/+85°C] ±0.5%。

SX40000倾角传感器采用过阻尼敏感元件和非常创新的差分测量原理，在振动下（低偏置整流误差、低噪声）实现了卓越的性能。此外，敏感元件设计为可承受非常高的 g 冲击 (200g/6ms)。

电源范围为 +4.5 至 +30VDC。该装置有 6 个不同的范围，±3°、±14.5°、±70°。信号以 4-20mA、RS485 和 USB 输出的形式提供给最终用户。

MEMS 倾斜传感器专为在严苛的振动环境中运行而设计，其关键参数之一是其在 0.01Hz 和 10Hz 之间的可调带宽（得益于可配置的数字滤波器）。

传感器启动时会自动进行完整的自动测试，并将结果传输到数字输出和 TOR BIT-OUT 输出。