MEROBEL制动器FRAT 2002技术参数

MEROBEL被REDEX收购，产品有：驱动器，模块等等

Specifications
Nominal torque	200(Nm)
Minimal torque	2(Nm)
Coil resistance - 20°C	12(ohms)
Rated current DC	1,55(A)
Rotor inertia	35,2.10-3(kg.m2)
Weight	30(kg)
Heat dissipation
continuous sustained without ventilation	750(W)*
continuous sustained with MEROBEL ventilation	2000(W)*

MEROBEL制动器介绍

Key features

Linear torque adjustment by electrical current

Adjustable and repeatable torque setting

Torque independent of rotation speed

Smooth (stepless) torque transmission

Noiseless

Dustless

主要特征

通过电流进行线性扭矩调节

可调和可重复的扭矩设置

扭矩与转速无关

平稳（无级）扭矩传递

无声

无尘

Utilization

• Mounting must be made without any stress.Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing.

• Low DC current power supply for coil.(See MEROBEL Electronic data sheets )

• The standard device is designed for horizontal shaft orientation,and a minimal speed of 60 RPM. Maximum speed is 2000 RPM (without exceeding the max. heat dissipation capability).

• For Engineering application, please contact our technical support.

• In normal use, the outside temperature of the device can increase up to 100°C, without damage.

利用率

• 必须在没有任何应力的情况下进行安装。特殊润滑（不允许使用其他内部润滑剂）。轴应在装配时润滑，以防止卡住。

• 用于线圈的低直流电流电源。

• 标准设备设计用于水平轴方向，最低速度为60 RPM。最高转速为 2000 RPM（不超过最大散热能力）。

• 对于工程应用，请联系我们的技术支持。

• 在正常使用中，设备的外部温度可升高至100°C而不会损坏。

MEROBEL制动器其他常用型号：

MEROBEL FRAT 2002

MEROBEL 330.200.71

MEROBEL 314.230.10